BOQUILLAS PARA LAVADORA A PRESIÓN BLACKLINE® FLOW SERIES
Precio de oferta$14.40Precio normal$18.00Ahorra 20%
✔ Swap patterns in seconds, no tools ✔ Stainless steel quick connect ✔ Wide fan for paint, tighter for grime ✔ Fits any 1/4 inch quick connect
The pattern does the work.
One spray angle cannot handle a whole wash. Wide fans cover paint safely, tighter angles break down grime in wheel wells and arches, and a dedicated rinse nozzle sheets water off fast. These swap in seconds on any 1/4 inch quick connect.
This itemBOQUILLAS PARA LAVADORA A PRESIÓN FLOW SERIESBoquilla de enjuague de 0,3 mm$14.40
FREE shipping unlocked
$85
Bundle total$99.40
Precision Orifice
A consistent, even spray pattern so pressure lands where you aim it instead of scattering across the panel.
1/4" Stainless Quick Connect
Pull the collar, seat it, release. Fits any pressure washer with a 1/4 inch female quick connect.
Three Patterns, One Wash
45° for paint, 25° for wheels and arches, 0.3mm Rinse to sheet water off.
Take your pick
Which Nozzle To Use
45° is your widest, gentlest fan for paint and large panels. 25° focuses the stream for wheels, arches, and stubborn grime. 0.3mm Rinse is built for rinsing down and sheeting water off.
Precision Spray Control
Each angle holds a consistent, even pattern, so pressure lands where you aim it instead of scattering across the panel.
Stainless Steel Quick Connect
A 1/4 inch male stainless adaptor fits any pressure washer with a 1/4 inch female quick connect. Push, click, and you are on to the next stage.
Built To Resist Wear
Stainless construction stands up to constant pressure and chemical exposure without corroding or losing shape at the orifice.
45° is your widest, gentlest fan for paint and large panels. 25° focuses the stream for wheels, arches, and stubborn grime. 0.3mm Rinse is built for rinsing down and sheeting water off.
Each angle holds a consistent, even pattern, so pressure lands where you aim it instead of scattering across the panel.
A 1/4 inch male stainless adaptor fits any pressure washer with a 1/4 inch female quick connect. Push, click, and you are on to the next stage.
Stainless construction stands up to constant pressure and chemical exposure without corroding or losing shape at the orifice.
How-to-use
Follow the steps to get the best results from your nozzle
Pick your nozzle for the panel.
Pull the collar, seat it, lock it.
Wash, then swap for the next stage.
FAQs
Quick answers from the Blackline team.
Which nozzle do I need?
45° for paint and general washing, 25° for wheels and heavier grime, 0.3mm Rinse for rinsing and sheeting water off. Most people end up using all three in one wash.
Will these fit my pressure washer?
Yes, if it has a 1/4 inch female quick connect. These use a 1/4 inch male stainless adaptor. They will not fit a garden hose.
Are they safe on paint?
The 45° fan is the one to use on paint. Keep your distance reasonable and never hold a tight angle close to a panel.
Why is my nozzle dripping or spraying unevenly?
Debris in the orifice is the usual cause. Flush it with clean water and check the seal on the quick connect.
1/4 INCH STAINLESS QUICK CONNECT
ONE WASH, THREE PATTERNS
Pressure at the pump is fixed. What changes at the panel is the angle it leaves the nozzle at, and that decides whether you are safely covering a fender or blasting brake dust out of a wheel barrel. Running the same nozzle for the whole job means compromising on one end or the other. Swapping takes a second on a quick connect, and it is the difference between rinsing paint gently and actually cleaning an arch.
1st got a killer deal on 2 of their badass big black microfiber drying towel! And one of my favorite purchases is the rinse nozzle for my pressure washer ! Finally someone made it where I can rinse with my pressure washer and not drag a hose out! Very happy!
Customer service sucks the ai did not work for I needed. Now I ordered the nozzle set I never received the 45 degree (grey) nozzle received the other two 25 degree and spray. Any help would be greatly appreciate. Thanks